Wednesday, October 30, 2019
High Involvement Management as a Management Tool to Intensify Work Essay
High Involvement Management as a Management Tool to Intensify Work - Essay Example According to Woods (2008), high involvement management as a management tool is focused on employee involvement in a particular work structure. The technique is mainly centered on the employee being allowed to make essential decisions regarding their jobs, as well as being part of the business. When looked at from a varying perspective, the employees are granted role empowerment. Bockerman, Bryson & Illmakunnas (2012) assert that employees who experience HIM have higher wellbeing and are less likely to absent from their duties when compared to like employees who are not subjected to the same conditions. Job demand control (JDC) model is founded on the fact that the value of employees in an organization is indispensable (Zirwatul, Ibrahim, and Ohtuska, 2012, 11). According to these authors, the success of an organization needs to be focused on the characteristics of the job as well as the wellbeing of the employees. Karasek and Theorell (1990) coined the job demand-control-support (JDCS) model that relates the characteristics of the job to wellbeing. From the brief definitions discussed, it is evident that JDC and JDCS models relate to high involvement management technique directly and with respect to the wellbeing of the employees. This brings back the thesis question; is high involvement management a tool that is used by managers to intensify work? Karasek (1979) points out that job demands are the stressors involved in completing an assigned workload. Such stressors are psychological and may relate to tasks that were not expected or a conflict between personal issues and the job (291). It is directly evident that work output by an employee who is stressed by such issues cannot be equal to a sober-minded employee who has no issue disturbing them. Karasek had an additional concept of latitude that that is based on decision authority and skill discretion (1979). e
Monday, October 28, 2019
British Government Essay Example for Free
British Government Essay Evaluate different methods of estimating the current extinction rate. Do you think that humans will induce a mass extinction on the same scale as the Big Five? Introduction: There is consensus in the scientific community that the current massive degradation of habitat and extinction of many of the Earths biota is unprecedented and is taking place on a catastrophically short timescale. Based on extinction rates estimated to be thousands of times the background rate, figures approaching 30% extermination of all species by the mid 21st century are not unrealistic, an event comparable to some of the catastrophic mass extinction events of the past. The current rate of rainforest destruction poses a profound threat to species diversity. Likewise, the degradation of the marine ecosystems is directly evident through the denudation of species that were once dominant and integral to such ecosystems. Indeed, this colloquium is framed by a view that if the current global extinction event is of the magnitude that seems to be well indicated by the data at hand, then its effects will fundamentally reset the future evolution of the planets biota. Robert Whittaker recognized an additional kingdom for the Fungi. The resulting five-kingdom system, proposed in 1969, has become a popular standard and with some refinement is still used in many works, or forms the basis for newer multi-kingdom systems. It is based mainly on differences in nutrition: his Plantae were mostly multicellular autotrophs, his Animalia multicellular, heterotrophs and his Fungi multicellular saprotrophs. The remaining two kingdoms, Protista and Monera, included unicellular and simple cellular colonies. Extinction rates in the fossil records: The time at which an organism is classified as becoming extinct is when the youngest fossil of its form is found. It is likely that there would have been later examples of the organism present, which were simply not preserved. It is known that some genera have existed for long periods around this time without leaving any known fossil record by the phenomena of Lazarus taxa. It is believed that these organisms were simply not preserved during the time they are missing, or preserved in offshore sediments as yet undiscovered. This may also be the case with many other organisms creating the illusion they are becoming extinct before they are in reality. Ecological Evolutionary Factor affecting the past extinction: Many claim that human activity caused a large scale of plants and animals extinction. The others claim that human caused extinctions are on a similar scale to those that occurred 65 million years ago at the boundary between the Cretaceous and Tertiary eras when most species perished including the dinosaurs. This causes two distinct worries: (1) The loss of species will harm humans (2) Quite apart from any harm to humans; there is a duty to prevent ecocide. According to Peter Raven (National Academy of Science) ââ¬Å"We are confronting an episode of species extinction greater than anything the world has experienced for the past 65 million years. Of all the global problems that confront us, this is the one that is moving the most rapidly and the one that will have the most serious consequences. And, unlike other global ecological problems, it is completely irreversible. â⬠Different people evaluate this duty differently. Since the purpose of these pages is establish the sustainability of material progress, Ill take the view that although biodiversity is an important amenity, we are mainly concerned with the extent to which losses of diversity are a threat to human progress. One interesting fact in the article concerns the effect of an increase in temperature on the north-south range of a plant species, especially of trees. It turns out that the northern limit of a species is determined by temperature. As that limit is approached the rate of growth goes to zero. However, the rate of growth of a species does not decline as it approaches the southern limit of its range but remains stable or even increases. What determines a speciesââ¬â¢ southern boundary is competition from other species that require high temperatures. For this reason the southern boundary of a species is likely to change slowly as its territory is gradually invaded by species liking warm temperature. The invasion is likely to begin in gaps caused by logging and various kinds of die-off. According to Lord Robert May (FRS)-Chief Scientific Adviser to the British Government. ââ¬Å"Hardly a day passes without one being told that tropical deforestation is extinguishing roughly one species every hour, or maybe even one every minute. Such guesstimates are based on approximate species-area relations, along with assessments of current rates of deforestation and guesses at the global total number of species (which range from 5 to 80 million or more. ) While such figures arguably have a purpose in capturing public attention, there is a clear and increasing need for better estimates of impending rates of extinction, based on a keener understanding of extinction rates in the recent and far past, and on the underlying ecological and evolutionary causes. â⬠Scientists who worry about extinctions often agree that the world will reach a new equilibrium as temperature increases assuming it does. However, they worry that the rate of increase of temperature is unprecedented and that species, especially of plants, will migrate northward too slowly and become extinct. Roughly 43 percent of the earthââ¬â¢s terrestrial vegetated surface has diminished capacity to supply benefit to humanity because of the recent, direct impacts of the land use. This represents 10 percent reduction in potential direct instrumental value (PDIV), defined as the potential to yield direct benefits such as agricultural, forestry, industrial and medical products. Capitalizing on the natural recovery mechanisms is urgently needed to prevent further irreversible degradation and to retain the multiple values of productive land. Differences in extinction rates among groups: Estimated Future extinction rates from the species area relations: A better way of studying rates of complete biota extinction levels has been developed with the analysis of isotopic ratios of Carbon. When life is abundant there is almost completely carbon-12 within the geological record. Enzymes within organisms, passing into organic matter faster, more efficiently accept this isotope, which becomes lithified into rock. At times of lowered biotic activity, such as at an extinction event when a lot of life has been killed, the ratio of carbon-13 within the rocks will be higher as a higher proportion of carbon will be being fixed as carbonates inorganically. Inorganic precipitation of carbon does not differentiate between the different isotopes of carbon as life does. By analyses of carbon isotope ratios it is then possible to see, by peaks in the carbon-13, at what times there has been a reduction of biotic activity. This is independent of whether organisms present are being preserved or not, and shows at what rates the extinction is occurring. Estimated future extinction rates from IUCN red Lists: Recent extinction rates are 100 to 1000 times their pre-human levels well known, but taxonomically diverse groups from widely different environments. If all species currently deemed threatened become extinct in the next century, then the future extinction rates will be 10 times recent rates. Although new technology provides details on habitat losses, estimates of future extinctions are hampered by our limited knowledge of which areas are rich in endemics. The 2004 IUCN Red List contains 15,589 species threatened with extinction. The assessment includes species from a broad range of taxonomic groups including vertebrates, invertebrates, plants, and fungi. However, this figure is an underestimate of the total number of threatened species as it is based on an assessment of less than 3% of the worldââ¬â¢s 1. 9 million described species. Among major species groups, the percentage of threatened species ranges between 12% and 52%. The IUCN Red List identifies 12% of birds as threatened, 23% of mammals, and 32% of amphibians. Although reptiles have not been completely assessed, the turtles and tortoises are relatively well reviewed with 42% threatened. Fishes are also poorly represented, but roughly a third of sharks, rays and chimaeras have been assessed and 18% of this group is threatened. Regional case studies on freshwater fishes indicate that these species might be more threatened than marine species. For example, 27% of the freshwater species assessed in Eastern Africa were listed as threatened. Of plants, only conifers and cycads have been completely assessed with 25% and 52% threatened respectively. References: Robert M. May, John H. Lawton and Nigel E. Stork. ââ¬Å" Assessing Extinction Ratesâ⬠ââ¬Å"Extinction Rate Analysisâ⬠http://palaeo. gly. bris. ac. uk/Palaeofiles/Permian/rateanalysis. html ââ¬Å"Restoring the value to the worlds degraded Landsâ⬠Gretchen C. Daily ââ¬Å"The future of biodiversity ââ¬Å" Stuart L. Pimm, Gareth j. Russell, John L. Gittleman ,Thomas M. Brook ââ¬Å"IUCN Red List of Threatened Speciesâ⬠http://www. iucn. org/themes/ssc/red_list_2004/GSAexecsumm_EN. htm References: IUCN 2001. IUCN Red List Categories and Criteria: Version 3. 1. IUCN Species Survival Commission, IUCN, Gland, Switzerland and Cambridge, UK, pp. ii+30. Parr C. S. and Cummings M. P. 2005. Data sharing in ecology and evolution. Trends Ecol. Evol. 20: 362ââ¬â363. Purvis A. and Rambaut A. 1995. Comparative analysis by independent contrasts (CAIC): an Apple Macintosh application for analysing comparative data. Comput. Appl. Biosci. 11: 247ââ¬â251. Sherwood, Keith and Craig Idso (2003) ââ¬Å"The Specter of Species Extinction Will Global Warming Decimate Earths Biosphere? â⬠2003 September John Lawton and Robert May ââ¬Å"BIODIVERSITY AND EXTINCTION RATESâ⬠17-May-2004) www-formal. stanford. edu/jmc/progress/biodiversity. html
Saturday, October 26, 2019
Attitudes of Men in The Yellow Wallpaper by Charlotte Perkins Gilman :: free essay writer
The Yellow Wall Paper: Attitudes of Men I feel that The Yellow Wall Paper written by Charlotte Perkins Gilman was written as a response to the attitudes of men and male physicians toward women during this time period.Ã Gilman experienced the ordeal the woman narrator went through and in the introduction it states, "Gilman consulted the prominent nerve specialist Dr. S. Weir Mitchell, and underwent his famous 'rest cure'--a regimen of total bed rest, confinement, and isolation" (p. 799).Ã The woman narrator was also isolated in one room with only the yellow wall paper.Ã I feel that this type of confinement led her to become delirious and she stepped over the boundary to insanity.Ã She sees that "the faint figure behind seemed to shake the pattern, just as if she wanted to get out" (p. 806).Ã The woman in the wall paper is the narrator herself trying to break free from a male dominated society.Ã This point of a male dominated society relates back to her husband, who is in fact a doctor, who is ordering her to take total bed rest.Ã She does not have any choice but to listen to her doctor husband. Ã Ã The yellow wall paper has imprisoned her in this room.Ã I feel that the wall paper is a symbol of a male dominated society.Ã At first she absolutely hates it and then as she slips farther and farther out of reality, it grows on her:Ã "This paper looks to me as if it knew what a vicious influence it had!" (p. 803).Ã The smell of the room itself is a symbol of male dominance:Ã "It [the smell] is not bad--at first, and very gentle, but quite the subtlest, most enduring odor I ever met" (p. 809).Ã Ã Ã Ã Gilman experienced this male domination first hand.Ã "Returning home, her attempt to follow Mitchell's advice, which was to devote herself to domestic work and her child, [and] severely limit any intellectual work . . . almost drove her to the brink of 'utter mental ruin'" (p. 799).Ã By doing so, she had to succumb to what the doctor had ordered.Ã To give in to such orders and give up a passion of yours is humiliating just as the woman creeping by daylight is humiliating (p. 810). Ã Ã In the story, the woman narrator, had to give in to her husband just as Gilman had done with Dr.
Thursday, October 24, 2019
Forklift Safety
Forklift Safety 1 Forklift Safety Many industries and operations (manufacturing, agricultural and warehousing) use powered industrial trucks (including forklift trucks or lift trucks) routinely in the workplace. Forklift trucks are used to move, raise or lower objects that are stored in containers or on pallets to other areas of the workplace. Their use helps to improve workplace productivity and reduces the need for excessive manual handling of goods and objects by employees.However, according to the National Institute for Occupational Safety and Health there are around 100 fatalities and 20,000 serious injuries each year. Here, in the USA, as a result of forklift truck incidents. Pre Operational Check Pre operational check is the single most important part of operating a forklift. Without properly doing so, you are asking for a disaster. Possible injuries or death to yourself or others could vary likely happen under the wrong circumstances. The equipment you are operating is subjec t to failure, and it is just a matter of time until it does.It is the operators responsible to check for these failures. OSHA requires that all forklifts be examined at least daily before being placed in service. Forklifts used on a round-the-clock basis must be examined after each shift. [29 CFR 1910. 178(q)(7)]. The operator should conduct a pre-start visual check with the key off and then perform an operational check with the engine running. The forklift should not be placed in service if the examinations show that the vehicle may not be safe to operate.A vehicle in need of repair, defective or in any way unsafe, should not be driven and should be Forklift Safety 2 taken out of service immediately. Any problems should be recorded on the appropriate documents and reported to a supervisor. Forklift Capacities and Load Handling There are many different types of forklift trucks with different load capacities and they differ for specified maximum weight and forward center of gravity f or a load. Worker injuries mainly occur as a result of falls from forklift, forklift overturn, pedestrian collision and crushing ncidents. Operator falls can result as the worker ascends or descends into the driver cab or is ejected from the vehicle in the event of a collision or other incident. Forklift trucks may overturn as a result of overload, unequal center of gravity of the load or travel over an uneven surface causing the vehicle to topple over. Forty-two percent of forklift fatalities are caused by the operator trying to jump from a tipping vehicle. Wearing your seat belt is the best safety measure.Pedestrian co-workers, without adequate preventative measures, are at risk from forklift collision or accidents associated with an unsafe load. Forklift Training Standards There are strict standards in relation to forklift training, operation and maintenance. For example, people under the age of 18 years, in non-agricultural industries, are not permitted to operate a forklift tru ck. All forklift operators must have undergone practical training before operation of a forklift and are required to undertake refresher courses throughout their operating careers.Powered industrial trucks must also comply with standards as defined in the Forklift Safety 3 ââ¬Å"American National Standard for Powered Industrial Trucks, ANSI B56. 1-1969â⬠. The OSHA standards that employers and employees must adhere to are those as stated in the General Industry Standards. ââ¬Å"Powered industrial trucksâ⬠, and standards for Marine Terminals (29 CFR 1917 Subpart C, ââ¬Å"Cargo handling gear and equipmentâ⬠) and Longshoring (29 CFR 1918 Subpart G, ââ¬Å"Cargo handling gear and equipment other than ship's gearâ⬠).There are other directives and regulations that employers should be aware of. OSHA and NIOSH both comprehensively outline regulations or signpost employers and employees to all the regulations that apply. Conclusion Not just the workers working in the vi cinity, but even the forklift operator themselves are vulnerable to accidents which can result in minor or severe injury or even death. Forklift safety rules stress on lawful riding, speed limits, unauthorized operations, proper signals and load carrying capacity.Most often, accidents occur when these rules are not followed properly. Accidents are unfortunate mishaps which could take place anywhere, same is the case with forklift accidents. Though they can't be totally prevented, it is possible to minimize them by providing proper training to the operators, taking some safety measures and making use of our presence of mind. When you are operating equipment in an unsafe manner, not only are you endangering your life, but also those around you. Always remember, safety comes first. Forklift Safety Forklift Safety 1 Forklift Safety Many industries and operations (manufacturing, agricultural and warehousing) use powered industrial trucks (including forklift trucks or lift trucks) routinely in the workplace. Forklift trucks are used to move, raise or lower objects that are stored in containers or on pallets to other areas of the workplace. Their use helps to improve workplace productivity and reduces the need for excessive manual handling of goods and objects by employees.However, according to the National Institute for Occupational Safety and Health there are around 100 fatalities and 20,000 serious injuries each year. Here, in the USA, as a result of forklift truck incidents. Pre Operational Check Pre operational check is the single most important part of operating a forklift. Without properly doing so, you are asking for a disaster. Possible injuries or death to yourself or others could vary likely happen under the wrong circumstances. The equipment you are operating is subjec t to failure, and it is just a matter of time until it does.It is the operators responsible to check for these failures. OSHA requires that all forklifts be examined at least daily before being placed in service. Forklifts used on a round-the-clock basis must be examined after each shift. [29 CFR 1910. 178(q)(7)]. The operator should conduct a pre-start visual check with the key off and then perform an operational check with the engine running. The forklift should not be placed in service if the examinations show that the vehicle may not be safe to operate.A vehicle in need of repair, defective or in any way unsafe, should not be driven and should be Forklift Safety 2 taken out of service immediately. Any problems should be recorded on the appropriate documents and reported to a supervisor. Forklift Capacities and Load Handling There are many different types of forklift trucks with different load capacities and they differ for specified maximum weight and forward center of gravity f or a load. Worker injuries mainly occur as a result of falls from forklift, forklift overturn, pedestrian collision and crushing ncidents. Operator falls can result as the worker ascends or descends into the driver cab or is ejected from the vehicle in the event of a collision or other incident. Forklift trucks may overturn as a result of overload, unequal center of gravity of the load or travel over an uneven surface causing the vehicle to topple over. Forty-two percent of forklift fatalities are caused by the operator trying to jump from a tipping vehicle. Wearing your seat belt is the best safety measure.Pedestrian co-workers, without adequate preventative measures, are at risk from forklift collision or accidents associated with an unsafe load. Forklift Training Standards There are strict standards in relation to forklift training, operation and maintenance. For example, people under the age of 18 years, in non-agricultural industries, are not permitted to operate a forklift tru ck. All forklift operators must have undergone practical training before operation of a forklift and are required to undertake refresher courses throughout their operating careers.Powered industrial trucks must also comply with standards as defined in the Forklift Safety 3 ââ¬Å"American National Standard for Powered Industrial Trucks, ANSI B56. 1-1969â⬠. The OSHA standards that employers and employees must adhere to are those as stated in the General Industry Standards. ââ¬Å"Powered industrial trucksâ⬠, and standards for Marine Terminals (29 CFR 1917 Subpart C, ââ¬Å"Cargo handling gear and equipmentâ⬠) and Longshoring (29 CFR 1918 Subpart G, ââ¬Å"Cargo handling gear and equipment other than ship's gearâ⬠).There are other directives and regulations that employers should be aware of. OSHA and NIOSH both comprehensively outline regulations or signpost employers and employees to all the regulations that apply. Conclusion Not just the workers working in the vi cinity, but even the forklift operator themselves are vulnerable to accidents which can result in minor or severe injury or even death. Forklift safety rules stress on lawful riding, speed limits, unauthorized operations, proper signals and load carrying capacity.Most often, accidents occur when these rules are not followed properly. Accidents are unfortunate mishaps which could take place anywhere, same is the case with forklift accidents. Though they can't be totally prevented, it is possible to minimize them by providing proper training to the operators, taking some safety measures and making use of our presence of mind. When you are operating equipment in an unsafe manner, not only are you endangering your life, but also those around you. Always remember, safety comes first.
Wednesday, October 23, 2019
Advanced Internet Application Development
The page you create should alternate between a summary display and an editor display. When the user first arrives on your page, show a summary list of contacts in a Greedier. In It, each name has an edit link beside it. 2. When the user presses an Edit link or button, open an edit screen so the user can change the name or contact Info for person listed by the link. When doing this, hide the summary information.The user should get a screen much like this: There should be no screen flicker when the summary panel is hidden and the edit anal is displayed. 3. You are welcome to design your own Implementation, but one way accomplish the page Is to create an paternal and Insert two Panel controls as Illustrated here: Copyright 02014 Doug Steel. All rights reserved. This material may not be reproduced, displayed, modified or distributed without the express prior written permission of the copyright holder.Page 1 4. This is an Ajax assignment, so there is no need to create persistent storage u sing a database. 5. Upload your assignment to the MIS. Cull. Deed server for grading. Please contact our ABA manager, Chris Ware, if you need help accessing your account. Submission Turn In your assignment on the MIS server (mils. Cull. Deed) on or before the due date. Late assignments are accepted but they accrue late penalties of 20 points (20 percent) per day after a 24 hour grace period.Assignments submitted more than 5 days after the grace period earn a grade of zero. Please note: 0 Assignments must be submitted on the Web server. (Instructions for accessing the server are at the bottom of the server home page at http://mils. Cull. Deed. ) Assignments turned in via e-mail or thumb drive will not be graded. Page 2 prohibited from ââ¬Å"pre gradingâ⬠or telling you about mistakes before you submit your work.Grading Criteria The grader will consider the following attributes of the project you submit 0 The project should compile and run without generating error messages 0 The code should be neat, organized, and easy to follow 0 Your submission should have a few comments in the code that explain what is to be accomplished and how it will be accomplished. 0 The program should meet the specifications spelled out in the problem statement. It should produce the correct output for a given input Page 3
Tuesday, October 22, 2019
Free Essays on Strategy Analysis Of LOreal
Lââ¬â¢OREAL INTRODUCTION Strategy analysis focuses on the long-term objective generating alternative strategies, and selecting strategies to pursue. The firmââ¬â¢s present strategies, objectives and mission, couple with the external and internal audit information, provide a basis for generating and evaluating feasible alternative strategies (David 200). Lââ¬â¢Oreal has numerous competitors. To have an advantage on competition, Lââ¬â¢Oreal has to apply some strategies that include internal audit information and external opportunities that will make the company stronger. They will also prevent competitors to have an advantage over Lââ¬â¢Oreal. This report will be based upon the effectiveness of current strategies of Lââ¬â¢Oreal, a real global leader in every segment of the industry. CURRENT STRATEGIES Lââ¬â¢Oreal encounters threats and opportunities and they have weaknesses and strengths. It is known as the TOWS matrix. It is an important matching tool that helps managers develop four types of strategies: SO Strategies, WO Strategies, ST Strategies and WT Strategies. The external opportunities and threats were identified earlier (see part 1) by developing the ââ¬Å"External Factor Evaluation Matrixâ⬠and ââ¬Å"Competitive Profile Matrixâ⬠is important for the current strategies development. Lââ¬â¢Oreal internal strengths and weaknesses will be discussed further in this report. SO Strategies SO Strategies uses the internal strengths to take advantage of external opportunities of a firm. Lââ¬â¢Oreal has always taken these advantages with their new innovations and global expansion. The company is reaching out to more people across a bigger range of income and cultures than just about any other beauty-products company in the world. Lââ¬â¢Oreal strategy positions it beautifully to profit even further when the middle class begins to grow stronger in emerging markets. That makes Lââ¬â¢Oreal competitors more hustling to catch up. ... Free Essays on Strategy Analysis Of L'Oreal Free Essays on Strategy Analysis Of L'Oreal Lââ¬â¢OREAL INTRODUCTION Strategy analysis focuses on the long-term objective generating alternative strategies, and selecting strategies to pursue. The firmââ¬â¢s present strategies, objectives and mission, couple with the external and internal audit information, provide a basis for generating and evaluating feasible alternative strategies (David 200). Lââ¬â¢Oreal has numerous competitors. To have an advantage on competition, Lââ¬â¢Oreal has to apply some strategies that include internal audit information and external opportunities that will make the company stronger. They will also prevent competitors to have an advantage over Lââ¬â¢Oreal. This report will be based upon the effectiveness of current strategies of Lââ¬â¢Oreal, a real global leader in every segment of the industry. CURRENT STRATEGIES Lââ¬â¢Oreal encounters threats and opportunities and they have weaknesses and strengths. It is known as the TOWS matrix. It is an important matching tool that helps managers develop four types of strategies: SO Strategies, WO Strategies, ST Strategies and WT Strategies. The external opportunities and threats were identified earlier (see part 1) by developing the ââ¬Å"External Factor Evaluation Matrixâ⬠and ââ¬Å"Competitive Profile Matrixâ⬠is important for the current strategies development. Lââ¬â¢Oreal internal strengths and weaknesses will be discussed further in this report. SO Strategies SO Strategies uses the internal strengths to take advantage of external opportunities of a firm. Lââ¬â¢Oreal has always taken these advantages with their new innovations and global expansion. The company is reaching out to more people across a bigger range of income and cultures than just about any other beauty-products company in the world. Lââ¬â¢Oreal strategy positions it beautifully to profit even further when the middle class begins to grow stronger in emerging markets. That makes Lââ¬â¢Oreal competitors more hustling to catch up. ...
Monday, October 21, 2019
Zion essays
Zion essays Theodor Herzl was certainly not the first Jew to dream of Zion, but he nevertheless put the wheels in motion (Zionism 1). Zionism is the name given to the political and ideological creation of a Jewish national state. The rise of the Zionist movement in the late 19th century culminated in the creation of this state in Palestine in 1948. Herzl was born of well to do middle-class parents. He first studied in a scientific secondary school, but to escape from its anti-Semitic atmosphere he transferred in 1875 to a school where most of the students were Jews. In 1878 the family moved from Budapest to Vienna, where he entered the University of Vienna to study law. He received his license to practice law in 1884 but chose to devote himself to literature. Remaining in Vienna, he became o correspondent for Neue Freie Presse (New Free Press), the liberal magazine of the bourgeoisie. In 1889 he married Julie Naschauer, daughter of a wealthy Jewish businessman in Vienna. The marriage was unhappy, although three children were born to it. Herzl had a strong attachment to his mother, who was unable to get along with his wife. These difficulties were increased by the political activities of his later years, in which his wife took little interest. These political activities culminated in 1896, when Herzl published Der Judenstaat, an informational pamphlet in which he proposed that the Jewish question was a political question to be settled by a world council of nations. Although the liberal magazine he worked for tried to prevent the publication of Der Judenstaat and never so much as mentioned it in its columns, Herzl would not be deterred. He gathered a small coterie and set out to convene the First Zionist Congress that same year. Being the first political movement to unify the diverse proto-Zionists, five delegates among 200 men and perhaps as many as 10 women convened the First ...
Subscribe to:
Posts (Atom)